Etchers commonly use one or more different types of acid when creating their

works. It depends on personal preference and desired outcome.

Etching steel takes longer than etching other kinds of metals. Acids diluted

with water or vinegar typically perform better on stainless steel than

concentrated acids.

The chosen etching design or pattern is as important as the steel. The novice

etcher should choose a high-contrast, black-and-white design that makes the

transferring process as simple as possible. Once the etcher chooses the

design, the etcher prepares the steel to get it ready to acceptthe design.

Completing the Process
Place the stainless steel facedown in the acid to permanently etch the design

into the steel. Take care to ensure the steel does not touch the bottom of the

container. The chemical bath is more effective with regular water agitation,

usually done every few minutes. The steel should remain in the solution until

the carved lines are the desired depth. Remove the steel from the acid, and

rinse it with water to remove any remaining acid. Remove the resist by using

acetone, alcohol, turpentine, or steel wool.

Size:

Thickness: 0.5mm - 2.0mm
Widths: 1000mm, 1220mm,  1250mm, 1500mm
Length: 2000mm, 2440mm, 2500mm, 3000mm

Metals:
Stainless steel: all grades including 304 / 1.4301 . 316 / 1.4401 . 430 / 1.4016

Applications
Our decorative stainless steel sheets are widely used in:

1.Elevator cabins

2.Elevator doors

3.Windows and doors

4.Modular kitchens (Backsplash, countertops, shutters)

5.Wardrobes panels

6.Kitchen appliances

7.Interior and Exterior wall claddings。

8. Pillar Claddings